| Overall saw dimensions: |
44" w x 34" d x 34" h
69 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 36" rails)
85 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 52" rails) |
| Cabinet footprint: |
20" w x 25" d |
| Cast iron table: |
24" w x 30" d, 44" w x 30" d (w/ extension wings) |
| Extension wing: |
10" w x 30" d |
| Extension table (optional): |
24" w x 30" d (36" rails), 40" w x 30" d (52" rails) |
| Weights (may vary with motor): |
530 lbs (table saw only)
635 lbs (with optional fence, 36" rails & table)
685 lbs (with optional fence, 52" rails & table) |
| Shipping weight (approx.): |
640 lbs (table saw only) |
| Blade: |
60-tooth, professional grade, 5/8" arbor |
| Blade diameter: |
10" |
| Blade tilt: |
Left |
| Blade kerf: |
3mm |
| Blade plate thickness: |
2mm |
| Max. depth of cut, blade at 0º: |
3 1/8" |
| Max. depth of cut, blade at 45º: |
2 1/4" |
| Max. rip, right of blade: |
52 1/2" (with optional 52" rails)
36 1/2" (with optional 36" rails) |
| Max. rip, left of blade: |
12 1/2" |
| Dado diameter: |
8" (requires a separate brake cartridge) |
| Dado max. width: |
13/16" |
| Arbor diameter at blade: |
5/8" |
| Main bearing size: |
62mm OD x 30mm ID |
| Second bearing size: |
52mm OD x 25mm ID |
| Table in front of blade (max. elevation): |
11" |
| Table behind blade (max. elevation): |
9 3/4" |
| Arbor Runout: |
0.001" Maximum Allowable Runout |
| Blade Lateral Movement Over Full Elevation Range: |
0.006" Maximum |
| Table Flatness Measured Diagonally: |
0.010" Maximum Gap |
| Overall Table and Extension Wing Flatness: |
0.025" Maximum Gap |
| Blade Alignment with Miter Slot: |
0.010" Maximum displacement |
| Deviation of Miter Gauge Indexing Stops from actual: |
±0.25º |
| Alignment between Splitter and Blade: |
0.010" Maximum difference |
| Miter slots: |
T-shaped, 3/4" at top, 1" at bottom, 3/8" deep
11 1/8" center-to-center
5 1/2" (arbor flange to center of right slot) |
| Dust collection port diameter: |
4" |
| Riving knife / splitter thickness: |
2mm |
| Blade guard: |
polycarbonate, extends only 5/8" to right of blade |
| Insert: |
zero clearance, phenolic core, melamine surfaces |
| Hand wheels: |
8" diameter, cast iron with chrome handle |
| Belts: |
2 V-ribbed belts |
Motor: (all 50-60Hz, TEFC)
|
3 hp, 1 phase, 230 V, 13 A
5 hp, 1 phase, 230 V, 20.5 A (optional)
5 hp, 3 phase, 230 V, 13 A (optional)
5 hp, 3 phase, 480 V, 6.5 A (optional)
7.5 hp, 3 phase, 230 V, 17.8 A (optional)
7.5 hp, 3 phase, 480 V, 9 A (optional)
|
